(C) 2009 OERG866 SOFTWARE
VISIT http://oerg866.gulli.to

PRODUCT PAGE: http://oerg866.gulli.to/mdpro.html

Open the program. To do that you open "mdpro.exe".

To enhance usability, the window is much bigger 
than in the DOS version, but just as easy to use.

You navigate through folders and search for the 
files you want to flash. Those you either double-
click or click on the "Add to list" button. When 
clicked on a file, the header is read and the ROM 
name will appear in the small text box below the 
file selection box. In the ROM list will now appear 
the name of the ROM as it is written in the file 
header. A Mega Drive ROM always has its ROM name 
at a special offset in the header. You can now 
delete the list, remove a special entry on the 
list after clicking on it or actually flash the 
ROMs. If you flash only one ROM, it will directly 
start up when you put the cartridge in your Mega 
Drive and turn it on. If you flash more than that 
(Windows version virtually allows up to 65536, 
Selection menu on the cartridge is limited to 256), 
a blue selection menu will appear first when you 
start your MD.

In the middle you have a few options which, as 
mentioned before, will be saved in an INI file.

FIX UNLICENSED GAMES: Unlicensed games don't have 
the SEGA copyright information written in their 
header. That means all Mega Drive/Genesis consoles 
with the "PRODUCED BY ..." screen won't work with 
these ROMs. This option fixes that problem by 
writing this information.

FIX CHECKSUM: A ROM always has a checksum written 
in its offset. Some manufacturers use a check 
routine for pirating-prevention purposes, but it 
can also indicate if the ROM has been modified 
(eg. a bad dump). This option fixes the checksums 
of every ROM so that no errors will be happening.

FORCE MD FORMAT: A ROM might not appear as a Mega 
Drive/Genesis ROM to ucon64. This option forces 
the correct recognition as Mega Drive/Genesis ROMs.

PAD ROM: Tototek MD-Pro flashcarts have problems 
reading data from ROMs with sizes not dividable 
by 8 (I think, don't quote me on this!!!). This 
option enhances the ROM with zeroes (therefore not 
affecting the checksum) until the amount of bytes 
matches these criteria.

LPT ADDRESS: Here you can enter the LPT Port address. 
In most cases, that value is 0x378 (e.g. as BIOS 
default).

MD-PRO XY: Here you can select whether your cartridge 
has 64 or 32MBit storage capacity.